On-Call Assistant

Alert received from AI Infra Monitor. Host: claw-gateway1, Severity: HIGH

Sources available: 3/3 — Runbook: ✓ | Past incidents: ✓ | Infra health: ✓

Auto-resolver: CPU at 22.2% (below 70% clear threshold) — clean check 1/2

Auto-resolver: CPU at 22.2% (below 70% clear threshold) — clean check 1/2

Auto-resolver: CPU at 22.2% (below 70% clear threshold) — clean check 2/2

AUTO-RESOLVED: CPU sustained below 70% for 2 consecutive checks. Current value: 22.2%

Handoff notes generated: # Shift Handoff Notes - **Incident**: claw-gateway1 experienced critical CPU spike to 96.1% at 00:03 UTC on 2026-05-08 due to a runaway process; auto-resolved at 00:21 when CPU dropped to 22.2% and sustained below 70% threshold for 2 consecutive checks. - **Root Cause**: Runaway process consuming CPU cycles; potential memory leak or inefficient query identified as likely culprit. - **Resolution**: Incident auto-resolved without manual intervention required. CPU normalized to 22.2% within ~13 minutes of alert. - **Current State**: claw-gateway1 CPU healthy and stable. No ongoing degradation to gateway services. - **Watch For**: Monitor claw-gateway1 CPU trends over next shift for recurrence. If spike repeats, manually SSH to host and run `top` to identify the specific process, then kill/restart as needed. Consider reviewing process logs and memory usage patterns to identify root cause of initial spike.

Handoff notes generated: # Shift Handoff Notes - **Incident Summary**: claw-gateway1 experienced critical CPU spike to 96.1% at 00:03 UTC on 2026-05-08, caused by a runaway process; auto-resolved at 00:21 UTC when CPU dropped to 22.2% and sustained below 70% threshold for 2 consecutive checks. - **What Was Done**: System auto-resolved after CPU normalized; no manual intervention was required. Root cause identified as runaway process consuming CPU cycles, potentially linked to memory leak or inefficient query. - **Current State**: RESOLVED. claw-gateway1 CPU stable at 22.2% as of handoff. Gateway is operational with no service degradation reported. - **Watch For**: Monitor claw-gateway1 CPU metrics closely over next shift for signs of recurrence. If CPU spikes again, SSH to host and run `top` to identify offending process for manual remediation or service restart. - **Recommended Follow-up**: Investigate root cause of runaway process during next business hours (code review, query optimization, memory leak analysis) to prevent future incidents.

Handoff notes generated: # Shift Handoff Notes - **Incident**: claw-gateway1 experienced critical CPU spike to 96.1% at 00:03 UTC on 2026-05-08, caused by a runaway process consuming CPU cycles. - **Resolution**: Incident auto-resolved at 00:21 UTC when CPU dropped to 22.2% and remained below 70% threshold for 2 consecutive checks (13-minute resolution window). - **Current State**: Host is stable with CPU at normal levels; no manual intervention was required. - **Root Cause**: Likely runaway process or memory leak causing sustained CPU load—specific process not identified in logs as auto-resolution occurred before manual diagnosis. - **Watch For**: Monitor claw-gateway1 CPU usage over the next shift for signs of recurrence. If spike repeats, SSH to host and run `top -b -n1 | head -20` to identify the culprit process and consider permanent fix or service restart.

Handoff notes generated: # Shift Handoff Notes - **Incident**: claw-gateway1 experienced critical CPU spike to 96.1% at 00:03 UTC on 2026-05-08, caused by a runaway process consuming CPU cycles. - **Resolution**: Incident auto-resolved at 00:21 UTC when CPU dropped to 22.2% and sustained below 70% threshold for 2 consecutive checks. No manual intervention was required. - **Current State**: Host is healthy with CPU at 22.2%. All systems nominal. - **Root Cause**: Runaway process identified as the culprit; potential memory leak or inefficient query. Process self-terminated or issue self-corrected during the incident window. - **Watch For**: Monitor claw-gateway1 CPU metrics over the next shift for any recurrence of the spike. If CPU climbs above 70% again, SSH in to run `top` and identify the offending process for investigation or restart.

Handoff notes generated: # Shift Handoff Notes - **Incident**: claw-gateway1 experienced critical CPU spike to 96.1% at 00:03 UTC on 2026-05-08, caused by a runaway process consuming CPU cycles. - **Resolution**: Issue auto-resolved at 00:21 UTC when CPU dropped to 22.2% and remained below 70% threshold for 2 consecutive checks (18-minute incident window). - **Current State**: RESOLVED — claw-gateway1 CPU stable at 22.2%; no ongoing service degradation. - **Root Cause**: Runaway process identified as culprit; potential memory leak or inefficient query. Specific process details not captured in logs. - **Next Steps**: Monitor claw-gateway1 CPU trends over next shift. If spike recurs, SSH to host and run `top -b -n1 | head -20` to identify offending process; kill/restart as needed. Consider reviewing recent deployments or query changes on this gateway.

Handoff notes generated: # Shift Handoff Notes - **Incident**: claw-gateway1 experienced critical CPU spike to 96.1% at 00:03 UTC on 2026-05-08, caused by a runaway process consuming CPU cycles. - **Resolution**: Incident auto-resolved at 00:21 UTC when CPU dropped to 22.2% and remained below 70% threshold for 2 consecutive checks (18-minute duration). - **Current State**: Host is healthy with CPU at 22.2%. No manual intervention was required; issue self-resolved. - **Root Cause**: Runaway process identified as likely culprit; possible memory leak or inefficient query. Process terminated/recovered automatically. - **Watch For**: Monitor claw-gateway1 CPU metrics over the next shift for recurrence of spike patterns. If CPU exceeds 90% again, SSH to host and run `top` to identify offending process, then kill or restart the service per runbook.